Atlas Facility Maintenance 
Let us take the world off your shoulders 

Roofing Yearly Maintenance 

Without Proper maintenance and inspections roofing issues can pile up and cost your facility a fortune to fix. Maintaining yearly visits to inspect your roof can help you address issues before they occur. Atlas Facility Maintenance, with customer agreement can set up visits to keep your facility's roof strong, and keep expensive repairs from happening. 

Here are some things you can do:

ROOFING

✓ Inspect at least twice a year, and after any severe storm.

✓ Create a roofing file for each building; review warranty information.

✓ Clear roof drains of debris (roof warranties don't cover this).

✓ Walk the perimeter to examine sheet metal, copings, and previously repaired sections.

✓ Check roof-to-wall connections, and examine flashings (at curbs and penetrations, etc.) for wrinkles and tearing.

✓ For single-ply roofs, re-caulk the top of face-mounted termination bars (if needed).

✓ For bituminous roofs, check for splits in the stripping plies.

✓ Keep traffic off of the roof to avoid membrane damage.

✓ Plan a moisture survey every 5 years to detect wet insulation or leaks.

 After Atlas Facility Maintenance has performed our Roofing Preventive Maintenance Visit, we will send you a free estimate for any of the repairs or issues we have fond. With your agreement we can schedule repairs right away to insure they do not become a more serious problem. 

Don't Forget about your roofs this year! 

Atlas Facility Maintenance: HVAC

Atlas Facility Maintenance: HVAC

Preventive Maintenance Check List 

Going through hot summer months, and frigid winter months can age your HVAC unit, and make it less efficient. Scheduling preventive maintenance can prevent costly repairs by twice a year, giving your HVAC systems a tune up! 

Spring HVAC PM Checklist

• Replace Filters
• Blow Out Condensate Drain and Clean Pan
• Wash condenser coil (provided water is available)
• Measure Freon Level and fill as needed
• Visually Inspect for Refrigerant Leaks
• Check supply and return air temperatures
• Inspect Electrical Disconnect for proper operation
• Tighten Electrical Connections
• Measure and record Volts/AMPS on Motors
• Inspect Safety Controls (If applicable)

Summer HVAC PM Checklist

• Replace Filters
• Measure Freon Level and fill as needed
• Blow Out Condensate Drain and Clean Pan
• Check supply and return air temperatures
• Lubricate all motors and non-sealed moving parts
• Inspect and replace as needed Belts

Fall HVAC PM Checklist

• Replace Filters
• Inspect Adjust Ignition and Burner Assembly (Gas)
• Inspect Heat Exchanger (Gas)
• Sequence Electric Heat, Check AMP Draw (Electric)
• Inspect and Adjust Indoor Blower Components
• Tighten Electrical Connections
• Blow Out Condensate Drain and Clean Pan
• Cycle Heating and Cooling
• Check Outside Air Economizer (If Applicable)

Winter HVAC PM Checklist

• Replace Filters
• Inspect and replace as needed Belts
• Lubricate all motors and non-sealed moving parts
• Blow Out Condensate Drain and Clean Pan
• Cycle Heating and Cooling
• Inspect Adjust Ignition and Burner Assembly (Gas)
• Inspect Heat Exchanger 

If you stick to strong maintenance schedule you can expect a much longer life from your HVAC units!

Be sure to check us out on Twitter! Atlas_FM

Atlas Facility Maintenance! 

Atlas Facility Maintenance is a national maintenance service provider. We work from coast to coast to provide our restaurant, and retail customers with quality, timely service. Atlas Facility Maintenance understands the crucial implementations of budgets, efficiency, and keeping a safe work environment for your employees. We proactively track data for each location’s equipment, offer 6 month warranties on all work completed without sacrificing quality. Atlas Facility Maintenance gives you the tools to cut cost. 

Atlas Facility Maintenance is ready to dispatch educated, seasoned technicians to your maintenance problem. We operate with guaranteed arrival times of 24 hours, and for an emergency service request we guarantee a 3 hour response time. Maintenance can be unpredictable, and we believe your ETA’s shouldn't be.

Our dedicated staff can furnish you with warranty reports, expenditure reports, and any other information you need. We are available for work orders 24/7 and you won’t reach an answering service when you call after hours, you will reach our on call manager ready to assist you.

Upon receiving your work order our team immediately begins dispatching the request to the best and most qualified technician for the job. Through every stage of our work order process, each ticket is handled with a sense of urgency, and attention to detail. Whether is leaky pipes, failing air conditioning units, or remodels, Atlas is here for you.

Atlas Facility Management prides ourselves on serving customers like they are our only.

At Atlas Facility Maintenance, every invoice is completely broken down, and transparent. There are no hidden fees, or percentages.

We offer free estimates, and bids. Our flat trip charge fee of fifty dollars is only applicable on the first trip to the location, invoices under one hundred dollars will not be subjected to a travel charge.

Updates, and reports can be given on a set schedule or as needed.

A guaranteed 24 hour response time on all maintenance work orders or we will take 10% off your invoice. 

6 month warranties on every work order, no exceptions.

We call every manager after each work order to ensure quality.

Southern hospitality, and honesty follow us through every service request. 

We would love to talk to you today about cutting cost for your facility!